Benoit Daireaux

Towards the Correct Interpretation of Real-Time Signals on the Well-Site – 2023

Automatic Determination of Drill-string Geometry for Numerical Drilling Models – 2023

Interoperability of Real-Time Drilling Signals at the Rig Site: An Example Based on Mechanical Specific Energy – 2023

On Transitions Functions Model for Decision-Making in Offshore Operations – 2022

DADPC: Demonstration of autonomous drilling in OpenLab and at Ullrigg test centre – NORCE Norwegian Research Centre 2022

Demonstration of Autonomous Drilling on a Full-Scale Test Rig – 2022

Development, Testing and Validation of an Adaptive Drilling Optimization System – 2021

Multi-Trajectory Hydraulic Model for More Accurate Geosteering Constraints – 2021

Autonomous Decision-Making While Drilling – Energies 2021

Drilling Data Hub – NORCE Norwegian Research Centre 2020

Statistical Determination of Bit-Rock Interaction and Drill String Mechanics for Automatic Drilling Optimization – 2020

Toward Seamless Interoperability between Real-Time Drilling Management and Control Applications – 2019

OpenLab: Design and Applications of a Modern Drilling Digitalization Infrastructure – Society of Petroleum Engineering 2019

Challenges and Solutions to the Correct Interpretation of Drilling Friction Tests – 2017

Use of Quantitative Risk Analysis Methods to Determine the Expected Drilling Parameter Operating Window Prior to Operation Start: Example From Two Wells in the North Sea – 2017

RT-Hub - Next Generation Real-time Data Aggregation While Drilling – 2017

Open drilling simulator for research, education and development of future drilling technology – Oil, Gas 2016

Insights Into the Physical Phenomena That Influence Automatic Gain/Loss Detection During Drilling Operations – SPE Drilling & Completion 2016

Towards Closing the Loop on Drilling Fluid Management Control – 2015

SPE-173858-MS Possibilities, Limitations and Pitfalls in Using Real-Time Well Flow Models During Drilling Operations – 2015

Principles and Sensitivity Analysis of Automatic Calibration of MPD Methods Based on Dual-Gradient Drilling Solutions – 2014

Toward Drilling Automation: On the Necessity of Using Sensors That Relate to Physical Models – SPE Drilling & Completion 2014

Developing Operational Procedures for Safe and Efficient Application of New Process Control Functionality on the Drilling Rig – 2013

Advanced Drilling Simulation Environment for Testing New Drilling Automation Techniques and Practices – SPE Drilling & Completion 2012

Early symptom detection based on real-time evaluation of downhole conditions: principles and results from several North Sea drilling operations – SPE Drilling & Completion 2012

From Machine Control to Drilling Control On the Necessity of Sensors which Relates to Physical Models – IEEE Instrumentation and Measurement Technology Conference. Proceedings 2012

Automation of Drawworks and Topdrive Management to Minimize Swab/Surge and Poor-Downhole-Condition Effects – SPE Drilling & Completion 2011

Modeling a drilling control system, as a Discrete-Event-System – 2011

Automation of Mud-Pump Management: Application to Drilling Operations in the North Sea – SPE Drilling & Completion 2011

Se alle publikasjoner på Cristin