Arne Stavland

Recommended polymer workflow: Lab (cm and m scale) – Universitetet i Stavanger 2022

Recommended polymer workflow: Interpretation and parameter identification – Universitetet i Stavanger 2022

Flow behavior of thermo-thickening associative polymers in porous media: effects of associative content, salinity, time, velocity, and temperature – SN Applied Sciences 2022

Associative polymers for disproportionate permeability reduction – Formation wettability effects – Journal of Petroleum Science and Engineering 2021

Validation and benchmarking of an inorganic aluminium-carbamide gel system for in-depth and near wellbore conformance control – SPE Improved Oil Recovery Conference 2020

Scaling of Mechanical Degradation of EOR-polymers: From Field-Scale Chokes to Capillary Tubes – SPE Production & Operations 2020

Water Shut-Off with Polymer in the Alvheim Field – 2019

An Experimental Investigation of Polymer Mechanical Degradation at the Centimeter and Meter Scale – SPE Journal 2019

Modeling of Associative Polymer Flow in Porous Medium – 2019

An Investigation of Polymer Mechanical Degradation in Radial Well Geometry – Transport in Porous Media 2019

Core scale modeling of polymer gel dehydration by spontaneous imbibition – SPE Journal 2019

Polymers and polymer-based gelants for improved oil recovery and water control in naturally fractured chalk formations – Chemical Engineering Science (CES) 2018

Core-Based Evaluation of Associative Polymers as Enhanced Oil Recovery Agents in Oil-Wet Formations – Journal of energy resources technology 2018

An Experimental Investigation of Polymer Mechanical Degradation at cm and m Scale – 2018

Core Scale Simulation of Spontaneous Solvent Imbibition from HPAM Gel – 2018

A model for non-Newtonian flow in porous media at different flow regimes – Computational Geosciences 2017

Associative Polymers as Enhanced Oil Recovery Agents in Oil-wet Formations - A Laboratory Approach – 2017

When Size Matters - Polymer Injectivity in Chalk Matrix – 2017

EOR Screening and Potential Applications on the Norwegian Continental Shelf (NCS) – 2017

Temperature-switchable Polymer for Enhanced Oil Recovery – 2017

Integration of IOR Research Projects through Generic Case Studies – 2017

Silicate Gel for In-depth Placement- Gelation Kinetics and Pre-flush Design – 2017

A Model for Non-Newtonian Flow in Porous Media at Different Flow Regimes – 2016

Disproportionate Permeability Reduction of Water-Soluble Silicate Gelants - Importance of Formation Wettability – SPE Production & Operations 2016

Laboratory testing of environmentally friendly sodium silicate systems for water management through conformance control – SPE Production & Operations 2016

Polymer flow through water-and oil-wet porous media – Journal of Hydrodynamics 2015

Numerical evaluation of dynamic core-scale experiments of silicate gels for fluid diversion and flow-zone isolation – SPE Production & Operations 2014

Core-scale simulation of polymer flow through porous media – Journal of Petroleum Science and Engineering 2013

Mechanisms Involved in Microbially Enhanced Oil Recovery – Transport in Porous Media 2012

How To Apply the Flow Velocity as a Design Criterion in RPM Treatments – SPE Production & Operations 2010

Scleroglucan Gels for Profile Modification in High-Temperature Reservoirs – SPE Advanced Technology Series 1995

Se alle publikasjoner på Cristin